HASHIMA LOGO The only one than No.1 We support both side of hard ware and soft ware by Needle detector, fusing press,Quilting machine, ironing system and heat transfer system.
HASHIMA CO.,LTD.
SITE MAP
HOME Products Information Technology Company Information News Release Links
Contact us << Contact us japanese Japanese>> Chinese Chinese>>
@ @
HOME„Products Information„Press Machine „TOP FUSING MACHINE„HPM-600CA
@
‘ ILLUSTRATION OF PRODUCTS ILLUSTRATION
MODEL HPM-600CA
POWER SUPPLY Three phase or Single phase
RATED OUTPUT HEATERF7,400W
MOTORF90W
FUSING WIDTH 600mm
PRESSURE 5.0kg/cm2
MAX.TEMPERATURE 200Ž
INSTALLATION DIMENSIONS 2,050mm~1,200mm
WEIGHT (approx.) 296kg
FEATURES Drum heater assures sufficient material heating from the every start of operation, just the same as flat type heating.
Temperature is automatically controlled by means of an electronic thermostat and SSR, and it maintains a sensitive thermostatic switch that turns on and off alternately, and the control temperature difference range is always within }5Ž.
Uniformity and high pressure are maintained by a new air cylinder, a silicon rubber roller and pressure support roller.
Anti-static type Teflon belt assures longer belt life, and belt cleaning and maintenance is easy made.
Belt Warping Prevention Device (patent) maintains the belt at the same position at all times, so the operator needs only to insert the fabric.
An inspection window in the center of the operation table provides a clear view of the fabric.
@
@ bHOMEb Products InformationbTechnologybCompany InformationbNews ReleasebLinksbContact UsbSite Mapb @
@
@