HASHIMA LOGO The only one than No.1 We support both side of hard ware and soft ware by Needle detector, fusing press,Quilting machine, ironing system and heat transfer system.
HASHIMA CO.,LTD.
SITE MAP
HOME Products Information Technology Company Information News Release Links
Contact us << Contact us japanese Japanese>> Chinese Chinese>>
HOME > Technology > Interlining fusing > Classification of interlining. A kind of an adhesive and use
conveyor type needle detectour conveyor type needle detectour
1.Characteristic of needle detector
2.For improvement of detecting accuracy
3.Test by test piece
4.Trouble sheeting
interlining fusing interlining fusing
1.Purpose and use for interlining
2.Division of fusing
3.Trouble shooting of interlining
Technical information (interlining fusing)
2DDIVISION OF FUSING
Permanent Fusing and Temporary Fusing Interlining can be divided into 2 groups temporary and permanent. The purpose of temporary fusing is to make sewing easier and to reinforce the stitching. The fusing intensity does not need to be strong as it is merely to prevent puckering during stitching.Permanent fusing is used when the shape and style of the garment intact. Therefore after washing and long periods of use, the interlining must stay fused.
If the fusing temperature, pressure and timing are not correctly set, the intensity of the fusing will differ. Before fusing, the type of material and interlining being used and the desired intensity of the bond must be considered.
(a) Permanent fusing must stay fused after washing or dry cleaning.
(b) Temporary fusing is simply to make sewing easier and can become separated after the garment is completed.
TYPE OF INTERLINING ADHESSIVES
The interlining adhesive melts when heated, sticking to the material. Then, when cooled a stable bond is formed.
These days the most commonly used adhesives are as follows;

POLY-AMIDE
POLY-VINYL CHLORIDE
POLYTHYLENE
ETHYLENE VINYL ACID COPLYMER (EVA)
POLYESTER
TYPE OF INTERLINING ADHESSIVES AND FUATURES
TYPE SPECIFICATION MAIN PURPOSE TEMPERATURE DRY-CLEANABLE WASHABLE NOTE
POLY-AMIDE Wide variety of uses. For use with all dry cleanable garments. 120`160 Especially adopted to dry cleaning Not suitable for high temp Low temp fusing(100-130)is available
POLY-VINYL CHLORIDE Soft Finish For use with all garments, especially thick materials 130`160 Withhands drycleaning Good Results  
HIGH DENSITY POLYTHYLENE Resistant to all washing and cleaning For top fusing of shirts 150`180 Withhands drycleaning Very Good Results Needs high temp and pressure for fusing
LOW DENSITY POLYTHYLENE Can be fused by iron. Temporary Fusing 130`160 Adhesive Remelts Poor Results Stitching is neccesssary
ETHYLENE VINYL ACID COPLYMER (EVA) Can be fused by iron. Temporary Fusing 120`150 Adhesive Remelts Poor Results Stitching is neccesssary
SAPONIFY DEGENEATE EVA Can be fused by iron. For knitted garments,small parts and tape. 120`150 Average Average Results Melts in TETRACHL OR.ETHYLENE at over 170
POLYESTER Especially effected when used with polyester For polyester garments.FIXING 130`160 Very good only when used with polyester. Good Results
bHOMEb Products InformationbTechnologybCompany InformationbNews ReleasebLinksbContact UsbSite Mapb